766 - Hazard Marking Vinyl Tape

3M

E-Mail this datasheet

ADHESIVE TAPE FEATURES

Std Roll Length: 36.00 yards
5.0 mil. rubber adhesive
Polyvinylchloride backing
Backing is conformable to many surfaces
Black yellow striped

ADHESIVE TAPE ADVANTAGES

Stays in place
Draws attention
Enhances plant safety
Easy application saves time
Good instant adhesion

ADHESIVE TAPE APPLICATIONS

Marking of equipment pitch points or gears for warning purposes
Temporary floor marking around equipment or spills

ADHESIVE TAPE MARKETS SERVED

Industrial

ADHESIVE TAPE COLORS

GENERAL INFORMATION

A 5.0 mil. polyvinylchloride backed tape with rubber adhesive used for marking/ warning purposes and temporary floor markings. Printed in black and yellow stripes, 766 is a general purpose hazard marking vinyl tape for use in non-critical applications. While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacqure thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride
Adhesive (unwind)	Rubber	5.00
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	18.00 oz/in
Adhesive Removable	Yes
Adhesive Repositionable	Yes
Adhesive Activation	Pressure
Tensile Strength	13.00 lbs/in
Elongation Percent	180.00%
Testing Info: Peel Adhesion: ASTM D3330; Tensile: ASTM D3659; Elongation: ASTM D3659

SECONDARY PHYSICAL PROPERTIES

Solvent Resistant

Yes

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	60°F
Minimum Service Temperature	0°F

Adhesive Tape and Foam Converting Services

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.