765 - General Purpose Vinyl Tape

3M

E-Mail this datasheet

FEATURES

Std Roll Length: 36.00 yards
5.0 mil. rubber adhesive
Polyvinylchloride backing
Provided in eleven different colors
Pigmented vinyl backing is conformable to many irregular surfaces
Abrasion resistant
Rubber adhesive offers good instant adhesion

ADVANTAGES

Reduces costs associated with surface damage
Easy application saves time
Stays in place

APPLICATIONS

Protection of parts, equipment or products from abrasion
General purpose holding and color coding
Temporary marking of parts or machines

MARKETS SERVED

Equipment
Industrial

COLORS

Black
Blue
Brown
Clear
Gray
Green
Orange
Purple
Red
White
Yellow

GENERAL INFORMATION

A 5.0 mil. tape consisting of a polyvinyl-chloride backing with a rubber adhesive primarily used for protection, temporary marking and general purpose applications. 765 is a vinyl tape for use in non-critical applications such as color coding, safety marking, bundling, etc. While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl.

PRODUCT CONSTRUCTION

	Type	Mil Thickness

Backing	PVC - Polyvinylchloride
Adhesive (unwind)	Rubber	5.00
Thickness (total)		5.00

PRIMARY PHYSICAL PROPERTIES

	Unwind Side	Liner Side

Adhesion-to-Steel - 180° Peel	18.00 oz/in
Adhesive Activation	Pressure
Tensile Strength	13.00 lbs/in
Elongation Percent	180.00%
Testing Info: Peel Ahesion:ASTM D3330; Tensile: ASTM D3659; Elongation: ASTM D3659; Thickness: ASTM D 3652

SECONDARY PHYSICAL PROPERTIES

THERMAL / ELECTRICAL PROPERTIES

Minimum Application Temperature	60°F
Minimum Service Temperature	0°F

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.